How do I identify a 302 Boss engine?

The Boss 302 crankshaft can be identified by the casting number of D0ZE-A/7FE-8. BTW, the 1969 – 1970 Boss 302 had an engine code of “G”, and were factory rated at 290 HP @ 5,800 RPM and 290 FtLbs @ 4,300 RPM. They were only available in the Boss 302 Mustang and the Cougar Eliminators.

What is the difference between a 302 and a 302 boss?

The Boss 302 block is much stronger, also has 4 bolt mains and heavy duty main caps. It uses longer rods (289 length) with cleveland style pistons. The heads are basically Cleveland 4V heads designed for a Windsor.

What engine does the Boss 302 have?

OHV 2 valves x cyl. The Ford Boss 302 is a high-performance “small block” 302 cu in (4.9 L) V8 engine manufactured by Ford Motor Company.

How can you tell the difference between a 302 and 351?

The easiest way to spot a 351 is to notice the difference in height between the intake gasket surface and the top of the timing cover at the front of the block. Another difference between the 351 from the 302 is the 1/2″ diameter of its head bolts compared to the 302 7/16″ bolts.

IT IS INTERESTING:  What is the sticker on car windshield?

How much horsepower does a 302 engine have?

Ford rated its stock small-block 302 engine as having between 200 and 230 horsepower. The engine can be modified, however, to increase the horsepower to over 400. By upgrading just the cylinder heads, headers and rockers, the Ford 302 can put out as much as 402 horsepower.

Can you put 351 Cleveland heads on a 302?

351C heads on a 302 is what a Boss 302 is. You just have to change the cooling ports a little and they will work. 302 and 351W heads are the same thing. The only difference is the head bolt size.

What is special about a Boss 302?

The Boss 302 takes the Mustang GT’s suspension and adds higher-rate coil springs, stiffer bushings, and a larger diameter rear stabilizer bar. The body is lowered 11 mm (0.433 in) up front and just 1 mm (0.039 in) in the rear to give it a more raked stance designed to recall the original.

Is the 302 a good engine?

The 302 is a solid,strong motor that if done right, can produce some serious horsepower. The best thing is, it’s been around so long, aftermarket parts are plentiful. anyone who says a 302 is junk doesnt know crap about crap. its one of the best and most reliable ford engines, any engine, made.

How much horsepower does a 5.0 liter 302 engine have?

Ford 302 cid V-8 SpecsEngine:Ford 302 Windsor V-8 (5.0L)Engine Weight:~ 450 lbsEngine Oil Capacity:6 qts w/ filterPeak Horsepower:130 hp – 205 hp (see table below)Peak Torque:233 lb-ft – 270 lb-ft13

IT IS INTERESTING:  Your question: What kind of cars use DOT 5 brake fluid?

How much does a Boss 302 cost?

When it was new, the Boss 302 was a reasonable performance bargain with a starting price of $40,145. And even though this is a special edition model, it has not been impervious to depreciation.

Is 302 better than 351w?

Overall a stock 351W is hands down stronger than a stock 302, thicker deck,cylinder walls,bigger head and main bolts, so it may be that the 302 is more easily built.

How much taller is a 351 than a 302?

1. 302 is an 8.2″ deck height, and the 351w is 9.5″. So that’s 1.2″ more deck height.

Are 302 and 351 Cleveland blocks the same?

The blocks are the same. You need 351 crank and rods to convert. If you want a really free revving 351, use the 351 crank, but use the 302 rods, as they are longer.12 мая 2003 г.

How do I get the most power out of my 302?

How to Get the Most Horsepower Out of a Ford 302

  1. Install a performance aftermarket cold air intake to replace the Ford 302 factory air intake. …
  2. Install a performance aftermarket exhaust system to replace the Ford 302 factory exhaust system. …
  3. Install a forced induction — supercharger or turbocharger — kit.

How long does a 302 engine last?

To elaborate on what I said earlier, yes, the 302 is often good for 200k miles or more without any work, but if you want it to run even better, install a new timing set at between 75k and 100k miles. The 302 is in my opinion, the best motor ever built.

IT IS INTERESTING:  How much does it cost to replace a Subaru Outback windshield?

How much horsepower can a 302 block handle?

The upper limit is definately in the 5-600 hp range. As long as you kept the rpms below 6500 it should live a long life at around 450hp.

Car service