The Ford C4 and C6 transmissions are two of the best performing, most durable transmission ever built. … The unit will shift into overdrive without attention of the driver and you can let the wife or whomever drive the vehicle.
How many gears does a c6 transmission have?
Is a c6 transmission a 4 speed?
The C6 is a non-electronic, three-speed transmission. The AOD features a four-speed, non-electronic transmission. It was not until 1992 that Ford introduced the electronic version of the AOD, the AODE.
Are all Ford c6 transmission the same?
For 1966, Ford introduced its own heavy-duty C6 3-speed automatic transmission for high torque applications behind large displacement big-block V-8s. Although the C6 has a completely different case and internal components than the C4, it is virtually the same internally to the C4—on a larger scale for heavy-duty use.
How do I know if I have a c6 transmission?
Look for a seam between the bell housing and the body of the transmission. If no seam exists, the transmission is a C6. If a seam does exist, it will be necessary to inspect the oil pan to determine whether the transmission is a C3 or a C4.
How much HP can a c6 transmission handle?
Yes a c6 will hold 500 hp but not a stock one with 3 high gear clutches or a stock valvebody…. A good upgrade is to remove the wave washer from the forward clutch and fit 5 plates,upgrade the high gear clutch to at least 4 but 5 is better and go with a transgo valvebody kit…
How much is a c6 transmission worth?
$100 – $150 for a C6 sounds about right.
Which transmission is better c4 or c6?
The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.
Will a c6 transmission bolt a 302?
The C6 WILL bolt up to a 302, as long as you use a small block bellhousing.
Is a c6 transmission good?
The C6 is the strongest, most durable light duty automatic Ford has made. It was designed in the 60’s during the horsepower wars. The E4OD / 4R100 is not necessarily a “crap” transmission, it is based on the C6.25 мая 2005 г.
What engines fit a c6 transmission?
There are four different bellhousings for a C6. The small V8 or windsor family, this includes the 3.8 V6, the 4.9 inline 6, the 289,302, and 351w, 351c (not a windsor built engine, but shares the same bellhousing). Then there is the FE C6, which fits FE only, 3xx to 429.
Will a c6 transmission fit a 351w?
— No, that 351W will not bolt onto your 351M C6. — No, all 351W engines used the 351W bellhousing pattern, shared by the 302, 289, 351C, and 300-I6. — Your C6 uses a pattern shared by the 351M/400M (same engine block), and 429/460.
How heavy is a c6 transmission?
What is the difference between a c4 and a c6 Ford transmission?
Ford C4 is a medium-duty transmission judging from its lightweight of 130 lbs dry w/ torque converter and its design with an aluminum case. … On the other hand, C6 transmission is a heavy-duty transmission that can handle much load.
What year is my c6 transmission?
The Ford C6 is a heavy-duty automatic transmission built by Ford Motor Company between 1966 and 1996. It was marketed as the “SelectShift Cruise-O-Matic”. Compared to its predecessor MX transmission, the C6 offered lower weight, less complexity, less parasitic power loss, and greater torque capacity for larger engines.
How long is a c6 transmission?