What does FE stand for on Ford engines?

The FE designation stands for Ford Edsel. This series of engine was first released in 1958 and continued in large-volume production until 1976. This 1967 427 medium-riser engine has dualquad carbs. It features original exhaust manifolds and trim. Ford offered two iterations of the 427 block–side oiler and top oiler.

What does Ford FE engine mean?

The Ford FE engine is a Ford V8 engine used in vehicles sold in the North American market between 1958 and 1976. The FE was introduced to replace the short-lived (in the USA) Ford Y-block engine, which American cars and trucks were outgrowing. … “FE” derives from ‘Ford-Edsel.

How do I know if my engine block is FE?

Since all FE engines look identical, there is no way to tell by looking at them to tell one size from another. Casting numbers on FE engine blocks are worthless for ID’ing the engine sizes, as the casting number is only related to the size the bare block was first cast as, which was 352 cid in most cases.

IT IS INTERESTING:  Frequent question: Can you rebuild a motor without removing it?

Is the Ford FE a big block?

In essence, the FE engine is neither a small block nor a large block engine, but a medium block. Ford’s M-E-L and “385” engines, with their 4.90″ bore spacing, were the true big blocks.

Is a 460 an FE motor?

The 429 and 460 engines are stout, hardy engines in base form. Unlike the FE/FT big-blocks, the 385-series bigblock is not a Y-block. … It means the 385-series big-block is a powerplant for the performance enthusiast on a budget.

Is 302 better than 351w?

Overall a stock 351W is hands down stronger than a stock 302, thicker deck,cylinder walls,bigger head and main bolts, so it may be that the 302 is more easily built.

What is the difference between a Ford 427 and 428?

The 427 is the earlier motor with the same stroke as the 390 & 406. The 428 came out in the late ’60’s. Has a smaller bore than the 427 (closer to the 406) and a longer stroke. The smaller bore was easier for Ford to manage with machining the castings in the ’60’s.

How do I identify my FE blocks?

The casting number is on the right (passenger) side of the block, in the front. FE (330-428 SCJ) note: nearly all FE blocks have 352 cast on the front of them. Solid Lifters, 2 core plugs at front of block, 4 in rear, and 3 on each side. Solid Lifters, 2 core plugs at front of block, 4 in rear, and 3 on each side.

What is the difference between a Ford 390 and a 428?

390 has a 4.05 bore and a 3.78 stroke, where as the 428 has a 4.13 bore and a 4.98 stroke. The externals on the blocks are identical and the stock 428s used 390 heads and cams. The 428s really worked better wiht the 427 hot rod stuff mainly because of the bigger inches.

IT IS INTERESTING:  How often does manual transmission fluid need to be changed?

How can you tell if a Ford engine is a 427?

Shoe. It appears that if the block is a 1968 date-coded block and has the undrilled side oiler passages running down the side of the block (passages flycut to fit the non-sideoiler motor mounts), then it may be a genuine 427 block.

How much horsepower does a 429 Cobra Jet engine have?

The 429 Cobra Jet was advertised as having 370 horsepower at 5400 RPM and 450 lbs-ft of torque at 3400 RPM. These ratings when compared to the standard 429 provided an extra 10 horsepower; however the peak torque was 30 lbs-ft less than with the standard version.

How much horsepower does a Ford 427 have?

616 horsepower

Is a Ford 352 a good motor?

it is a good motor and can be made better with a 390 kit if you want more power. if you just want to rebuild as a driver its fine like it is. The 352 is one of the FE family of engines. It was introduced in cars in ’58 (possibly early ’57), but wasn’t used in trucks until ’65.

Are 429 and 460 blocks the same?

What’s more, the 429 and 460 are completely interchangeable engines with their 4.36- inch bores. The only difference is stroke. The quickest path to displacement is the stock 460 crank. Drop a 460 crank into the 429 block and you have a 460.

How much horsepower can a 460 block handle?

A 74 460 can make over 530 HP and 580 ‘ lb of torque on a budjet build.16 мая 2007 г.

IT IS INTERESTING:  Who makes Craftsman snowblower engines?

Is a Ford 460 a good motor?

It is a truck engine and you will find it up to any task you wish to do with it. It is a solid workhorse that you can have fun with if you like tons of power. I think it’s the best light truck engine ever devised.

Car service